Suction Side Automatic Pool Cleaner, MX6 Zodiac

  • $297.00


Zodiac MX6 Pool Cleaner is compact in size, yet demonstrates a powerful clean. The MX6 Suction Pool Cleaner is a highly efficient  suction cleaner that displays great maneuverability and provides thorough pool coverage.

The Zodiac MX6 features:

Cyclonic Vacuum Technology

    • Cyclonic Vacuum Technology ensures the MX6 Suction Pool Cleaner captures smaller debris (compared to the MX8 which will pick up larger debris) whilst maintaining maximum cleaning power. Cyclonic Vacuum technology ensures the MX6 Suction Pool Cleaner captures maximum debris whilst maintaining maximum cleaning power.

X-Drive Navigation

    • X-Drive Technology provides great navigation for wall and floor cleaning resulting in thorough pool coverage. Intelligent cleaning, pre-programmed to reverse out of corners
      and provide total pool coverage.

Flex Power Turbine

    • Ultra-efficient power source provides maximum torque while operating at low flow, not burdening the pool system. The Flex power turbine is at the heart of the MX6 Suction Pool Cleaner. It is ultra
      efficient with maximum torque whilst operating at low flow.

User-friendly

    • Light weight and easy to handle. One click access to the internal components for easy maintenance. The MX6 Suction Pool Cleaner is light weight, easy to access inner components equipped with carry handle.

Flow Regulator Valve

    • The new Flow Regulator Valve (FRV) assists the MX6 in running at optimal performance, the FRV will bypass excess water in high flow conditions

Suitable for above ground and in ground pools – concrete, pebblecrete, quartzon, tile, fibreglass and vinyl surfaces.

Zodiac MX6 Specifications

Technology Hydraulic Suction – mechanical
Installation To the skimmer box with AD Flow Valve
Hose length 10 x 1m
Inground & above ground pools Recommended for max. 9m x 6m
All shapes Rectangular, oval, round, free form
All bottoms Flat, gentle slope, varying slope
All surfaces Tile, concrete, pebblecrete, quartzon, fibreglass and vinyl
Warranty 2 Yrs

 

Cleaner does not move or moves slowly.

  • Confirm that the main drain is closed.
  • Backwash the filter and empty pump basket.
  • Check for any debris jammed in engine. Refer to section, "Remove Trapped Debris from Cleaner" in manual.
  • Check for adequate flow to the cleaner. Refer to section, "Test for Proper Flow" in manual. Adjust valves at the equipment pad to change flow if necessary.
  • Check for air in system. If water level in pump basket drops or you see excessive air bubbles in the pump basket or coming from the return lines, there is air in the system. Check hose connections, tighten all fittings at pump and check o-ring at pump basket for wear.ner move or moves slowly?

Zodiac MX6 pool cleaner gets stuck at steps?

  • Observe cleaner for more than five (5) minutes and ensure that the cleaner periodically reverses direction. If it is not, contact your dealer or service center for help.
  • Ensure the swivel on top of the cleaner rotates freely.
  • Check for adequate flow to the cleaner. Refer to section, "Test for Proper Flow" in manual. Adjust valves at the equipment pad to change flow if necessary.
  • Confirm proper hose length. Refer to section, "Determine the Correct Hose Length for your Pool" in manual. Shorten hose if necessary.

Zodiac MX6 pool cleaner patterns do not cover entire pool?

  • Check for adequate flow to the cleaner. Refer to section, "Test for Proper Flow" in manual. Adjust valves at the equipment pad to change flow if necessary.
  • Ensure return fittings are directed down. Add a return diverter if necessary.
  • Make sure hose is not kinked or coiled. Lay in sun to straighten if necessary.
  • Verify correct hose float positioning. Hose float should be on the hose closest to the cleaner approximately 9 inches from the cleaner.
  • Observe cleaner for more than five (5) minutes and ensure that the cleaner periodically reverses direction. If it does not, contact your dealer or service center for help.
  • Confirm proper hose length. Refer to section, "Determine the Correct Hose Length for your Pool" in manual.

Zodiac MX6 pool cleaner riding on its side.

  • Verify hose float is positioned correctly. Hose float should be on the hose closest to the cleaner approximately 9 inches from the cleaner.

Zodiac MX6 pool cleaner won't climb walls.

Check for adequate flow to the cleaner. Refer to section, "Test for Proper Flow" in manual. Adjust valves at the equipment pad to change flow if necessary.